Toolbox: RPST Modeling Toolbox
Provides 3D Modeling Tools for Surfaces and Corridors as well as Reporting, Drafting and Data Output Generation Tools
Add Isopach
Computes a surcharge / overexcavation surface by adding a % of cut or fill depth to a selected surface. Can also be used to adjust a surface model to match grade at project limits or at other locations e.g. at bridge decks / abutments etc.
Adjust Area
Compute line that forms a boundary with a specified area
Assign Name from Inside Text
Names closed lines using text objects that lie within the polygons area
Best Fit Linestring
Create a best fit horizontal and/or vertical alignment to a 3D linestring
CIVRobotics Manager
Exports and emails stakeout point data to a selected CIVRobotics Staking Robot and imports As Staked points for reporting and QA purposes
Combine Surfaces
Combine multiple non overlapping surfaces into a single surface
Compute Lot Setback
Computes the setback line for a typical subdivision lot
Convert To Linestring
Convert CAD lines to linestrings. Option to remove UCS effect
Copy Layer Group Members
Copies a layer group and contained layers to a new layer group
Copy to Clipboard
Copy TBC objects to the Windows Clipboard using our virtual VCL format for quick and easy transfer between projects in combination with the RPS Paste command. Create copies of sheet sets including all settings in the same project.
Corridor As Built Report
Creates a formatted Excel Spreadsheet report from measured 3D points aligned to specified station intervals against a line or alignment, sorted from Left to Right across the alignment where each column of data is a specified code and the value presented is the Delta Elevation between the measured point and the referenced surface elevation
Corridor Cut Sheet Report
Generates a Cut Sheet report in excel based on the selected corridor
Create Slope Indicators
Create slope indicator marks or "tadpole" symbols between top and toe of embankment strings. Use the 3D slope indicator lines to enhance sideslopes and pavement surfaces in 3D surface models.
Create X-Lines
Generates section lines (XLines) and labels at key points and user defined locations along an alignment or corridor model. Can be used for Roads, Bridges, Walls and Buildings
Define Extra Stations
Add extra station locations to corridors to improve models and reporting
Divide by Slope Distance
Computes points at slope distance intervals along a line
Edit Alignment as Spreadsheet
Edit / Enter HAL/VAL alignment in a spreadsheet
Explode IFC Shell
Explode IFC Shells and CAD meshes into lines and points
Explode Lines
Explodes lines into line elements using break angle controls
Export HCSS
Exports an Alignment to the csv file format required by HCSS Plans
Export MOSS / MX GENIO
Exports selected objects in the Moss - GENIO file format
Export XML
Export linestring and alignment data to LandXML alignment format for stringless pavers
Extend Lines
Creates lead in and lead out line extensions to linestrings for stringless pavers
Extract Surface Features
Explodes surfaces into points and lines. Finds breaklines, drape lines, boundaries and feature linework within the TIN model to reverse engineer data out of basic TIN surfaces provided in LandXML or TTM surface formats.
Filter by Alignment
Find lines in a selection that align or cross an alignment
Find Surface Area
Find surface areas on a surface model using breakline limits
Geometric Selection
Selects and relayers data by geometric properties (length, aspect, nodes)
Getting Started
One click access to Getting Started instructions for the RPS Command library
Grid Volumes from Boundaries
Compute summary report of surface-surface volumes from list of boundaries
Import Boring Logs
Imports boring log data from a CSV file to create site (Takeoff) boring logs in order to rapidly build strata layers for earthworks quantity purposes.
Increment Text
Label drawings with incrementing text (station labels, pads and parking bays)
Insert Line Segment
Insert additional line segments to a linestring
Label Cut Fills
Creates labels with Cut / Fill information at the specified locations
Label Lines
Label selected lines with names, slopes, lengths, elevations, stations, offsets, elevation deltas to a reference surface at intervals along the line or in relation to a selected reference line. Labels can be exported to machine files to assist operators on site. Labels can be staggered to avoid overwrite of text in graphics / CAD
Label Points
Create offset and cut/fill labels between selected points and a reference linestring or alignment
Label Slope
Labels the Slope % or Ratio, Bearing, Horizontal Distance, Slope Distance and Vertical Distance with a slope arrow that points downhill between two 3D locations defined by points, lines or on surface locations.
Line Marking Manager
Manages the setup, control and display of TBC Line Markings. Includes Hot Key Access in all RPS Commands using CTRL + F.
Lines To AOI
Convert closed lines to Takeoff AOI's
Linestring by Station
Create a linestring from points sorted by alignment stationing
Menu Manager
Toggle between light and dark Mode menu color schemes
Modify ASCII File
Utility to modify the contents of an Ascii file (csv, pts, xyz, ...) using formulas to alter columns of data
Multi Offset Lines
Template driven offset line generation tool. Creates multiple offset lines from multiple source lines based on template driven instructions accessed from your personal template library. Created linework can be placed on any number of layers and be automatically incorporated into any number of surfaces.
MyRockpile Community
One click access to the MyRockpile Community forum
MyRockpile Library
One click access to the MyRockpile Library for all your training needs
MyRockpile Training
Upcoming training opportunities with Rockpile Solutions
Name by Layer
Names selected objects using the objects layer name. Allows Linestyle, Line Weight and Line Color to be set from ByLayer properties
Nudge
Moves lines a very small amount in order to prevent vertical surfaces
Offset Slope
Project surface defined by 2 lines to an offset and delta elevation location
Offset Surface
Provides the ability to offset an entire surface or an area of a surface within a clipping boundary to create a new surface model. This is a quick and easy tool to create e.g. Topsoil Strip surfaces from an Existing Ground surface model.
Optimize Linestrings
Optimizes horizontal and vertical linestring data to create curvilinear lines and alignments for stringless paver applications
Paste
Paste images into project from clipboard
PDF Vectors
Extracts vectors from georeferenced PDF images on demand using automatic and manual process controls. Lines can be layered, joined and elevated in the process, eliminating multiple Takeoff steps and increasing productivity.
Permit Area Manager
Create and tabulate project permit areas and validate total open areas
Perpendicular Distance to Surface
Computes the perpendicular distance between points and a surface
Point Cloud by Boundary
Create point cloud region from scan data using a boundary line
Point Detail Report
Customizable detailed point reports including references to surface and alignment objects
Points to Arc
Create arc in plane defined by 3 3D points
Points to Cloud Report
Reports ground control to point cloud point deviations for QA purposes
Points to CSV
Export points incl. station, offset from alignment and delta elevation to surface
Points to Grid
Create points in a grid using high/low/average elevation of points in a grid cell
Points to Station
Move survey points to an even station location
Project Files
Command opens the Windows File Explorer at your currently active Project File’s folder location, so that you can quickly access data that has been imported or generated from the current project.
QA Lines
Provides the ability to display the slope direction, slope value, slope or horizontal length and bearing allowing you to instantly identify lines / pipes that are too steep, too shallow, flowing the wrong direction or that fall within defined tolerance ranges
QA Notebook
Create QA markups, notes, assumptions, RFIs during project development (Takeoff or 3D Model) inside the TBC project that can be reported to Excel or plotted as drawing elements.
QA Points
Compare design point locations with as-builts to produce text, report or tables showing errors or corrections
QA Road Lines
Creates an elevation delta profile for a line against a corridor
Quick Line
Create simple linestrings quickly in 3D
Rockpile Contact
The Contact Us command allows you to raise a question to Rockpile Solutions staff directly from inside Trimble Business Center.
Rockpile Instagram
One click access to the Rockpile Solutions Instagram page
Rockpile LinkedIn
One click access to the Rockpile Solutions LinkedIn page
Rockpile Support
One click access to generate a Support Ticket for RPS staff assistance
Rockpile Website
One click access to the Rockpile Solutions website
Rockpile YouTube
One click access to the Rockpile Solutions YouTube page
RPS Settings
Manage your global RPS command settings
Shortcut Manager
Manages user's keyboard shortcuts for commands in TBC.
Show Line Direction
Show the direction of a selected line
Site Improvement Legend
Create a site improvement material layer legend on a drawing
Slope - Slope Intersection
Find the projected slope intersection between two pairs of lines and delta elevations
Slope Designer
Advanced tool for creating offset lines and sideslopes using combinations of slope, offset and delta elevation input or slope to target surface. Designed to provide manual or fully automated control and provide a great solution for both internal and external corner handling.
Station / Offset Points
Create points using station, offset and elevation inputs along a selected alignment
Surface Area by Slope Ranges
Computes cut/fill surface area for selected surfaces reported by slope ranges
Surface Intersection Linestring
Creates linestrings where the two given surfaces intersect
Surface to Grid
Compute a point grid from a surface and export an .xyz or .csv file
Surface to Points
Export surface vertices to a point cloud .xyz file
Text Style Manager
Manages Text Styles providing the ability to define a Stroked Font (good for CAD Speed) and a True Type Font (higher quality drawing presentation) on each text style, allowing you to swap between Stroked and True Types whenever you want to. The Stroke Font width, oblique angle and character weight can also be modified to more closely match the True Type font definition.
TMLStatus
Track and manage the installation and update of registered RPS commands
Toolbar Manager
Utility that provides the ability to save out your custom toolbars and import them back into a different menu configuration
Track Line Edge
Create edge and boundary lines between cross section elements
Unreleased - QA Floor
Performs Floor Flatness and Floor Levelness Checks on Point Cloud Scan data to the US ASTM 1155 standard
View Filter Override
Apply override color, linestyle and lineweight to ByLayer objects on selected Layers in a specified view filter for plotting purposes
Voice Command
Run and navigate TBC commands using voice control
Volumes Manager
Create and manage boundaries, boundary collections and boundary groups. Compute and store volume calculations for later recall. Label and annotate drawings with volume labels and tables and generate volume reports for a variety of volumetric scenarios e.g. Stockpiles, Progress, Cut / Fill, Pay Quantities etc.
VPI at Elevation
Create VPIs on a line at a specified elevation
© 2025 - Rockpile Solutions
